The department will be closed from Monday 23 December 2024 and will reopen on Thursday 2 January 2025. We will respond to queries in the new year. Best wishes for a safe and happy festive season.
Tenpin bowling is a sport that uses the imperial system of measurement.
The length of a regulation lane is 18.288m (60 feet) from the foul line to the centre of the headpin. The lane is 1.0668m (42 inches) wide but is measured in boards. There are 39 boards.
Board 20 is the center board, counting from either side. It is marked by the Center Arrow. Arrows are 5 boards apart for easy board counting.
The surface is free of all continuous grooves. It is perfectly flat both side to side and front to back with a maximum tolerance of just 40/1000th inch allowed.
The approach where the bowler delivers the ball is not less than 4.572m (15 feet) in length. The same lane finishing coating is applied from edge board to edge board.
The pins are located within a 91.44cm (36 inches) equilateral triangle, with each of the pins aligned 30.48cm (12 inches) apart centre to centre.
Each pin is 30.48cm (12 inches) from its neighbour in any direction (as measured from the centre of each pin).
Tenpin Bowling Australia Ltd.http://www.tenpin.org.au/
Sharon McKellar President PO BOX 580 Rockingham WA Telephone 0407 300 164 Email president@tenpinwa.org Website www.tenpinwa.org Facebook Tenpinperth
The information in this guide is general in nature and cannot be relied upon as professional advice concerning the design of, or marking out for, sporting facilities and playing areas. No assurance is given as to the accuracy of any information contained in this guide and readers should not rely on its accuracy. Readers should obtain their own independent and professional advice in relation to their proposed sporting activity.